Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Kim H.
Показаны 341−360 из 382	< предыдущая 1 ... 16 17 18 19 20 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Sim J., Kim H.-R., Choi Y.-S.(hanalam@paran.com), Yim S.-W., Sohn S.-H.(shshon@kepri.re.kr), Hwang S.-D.

Application of IPTs to HTS Cable Conductor for Uniform Current Distribution Between Their Layers

Ключевые слова: HTS, Bi2223/Ag, tapes, cables, transformers, ac losses, current distribution, homogeneity, test results, power equipment

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.1739-1742

Полный текст на Sci-Hub

Дополнительная информация

Kim H.J., Baek S.M., Kim S.H., Kwag D.S., Yun M.S.

Insulation test of reciprocal and concentric winding arrangement for a HTS transformer

Ключевые слова: HTS, Bi2223, insulating medium, breakdown characteristics, winding configurations, test results

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.1863-1866

Полный текст на Sci-Hub

Дополнительная информация

Jun B., Kim H., Kim C., Yoo J., Choi J., Heon L.S.

Comparative study of YBCO film growth in the cold wall type and hot wall type MOCVD processes

Ключевые слова: HTS, YBCO, coated conductors, MOCVD process, substrate SrTiO3, substrate stainless steel, IBAD process, microstructure, fabrication

Physica C, 2005, v.426-431, N , p.915-919

Полный текст на Sci-Hub

Дополнительная информация

Kim H.J., Choi J.K.(cjk1020@hanafos.com), Jun B.H., Kim C.J.

Effect of the Cu/Ba ratio for the YBCO deposition onto IBAD template by the MOCVD method

Ключевые слова: HTS, YBCO, coated conductors, MOCVD process, IBAD process, template layers, microstructure, critical current, fabrication, reel-to-reel process, critical caracteristics

Physica C, 2005, v.426-431, N , p.920-925

Полный текст на Sci-Hub

Дополнительная информация

Shi D., Youm D., Park C., Kim H.(cpark@keri.re.kr), Ko R., Chung J., Ha H., Park Y., Song K.

High rate DC-reactive sputter deposition of Y2O3 film on the textured metal substrate for the superconducting coated conductor

Ключевые слова: HTS, coated conductors, substrate Ni-W, reel-to-reel process, buffer layers, current-voltage characteristics, fabrication, high rate process, critical caracteristics

Physica C, 2005, v.426-431, N , p.926-932

Полный текст на Sci-Hub

Дополнительная информация

Kim H.S., Park C., Ha H.S., Song K.J., Ko R.K., Dou S.X., Chung J.K., Shi D.Q.(dongqi@uow.edu.au)

YBCO coated conductor using biaxially textured clad composite Ni–Mn/Ni–Cr substrate

Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-Mn, RABITS process, buffer layers, PLD process, current-voltage characteristics, microstructure, fabrication, critical caracteristics, cables, substrate Ni-Cr, power equipment

Superconductor Science Technology, 2005, v.18, N 10, p.1405-1409

Полный текст на Sci-Hub

Дополнительная информация

Kim H., Jeong S., Nam J.-W.(trainman@lge.com), Jung J.(jeheon@kaist.ac.kr), Kwon Y.-K.(ykkwon@keri.re.kr)

Investigation of On-Board Hybrid Pulse Tube Cryocooler for High Temperature Superconducting Rotor

Ключевые слова: cryocoolers, cryogenic systems, HTS, motors synchronous, rotating machines

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2190-2193

Полный текст на Sci-Hub

Дополнительная информация

Kim H., Park C., Song K.-J., Moon S.-H., Yoo S.-I., Ha H.-S., Ko R.-K., Chung J.-K., Shi D.-Q.

Use of SrTiO_3 as a Single Buffer Layer for RABiTS YBCO Coated Conductor

Ключевые слова: HTS, YBCO, coated conductors, PLD process, buffer layers, RABITS process, substrate Ni-W, texture, films epitaxial, fabrication

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.3020-3023

Полный текст на Sci-Hub

Дополнительная информация

Kim H.-J., Kim C.-J., Jun B.-H.(bhjun@kaeri.re.kr), Choi J.-K.

Fabrication of YBCO superconducting tape by metal organic chemical vapor deposition method

Ключевые слова: HTS, YBCO, coated conductors, substrate SrTiO3, MOCVD process, substrate CeO2/IBAD-YSZ/stainless steel, microstructure, current-voltage characteristics, growth rate, fabrication, critical caracteristics

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2751-2754

Полный текст на Sci-Hub

Дополнительная информация

Joo J., Kim C.-J., Jun B.-H., Choi J.-K., Kim H.-J.(sep1040@skku.ac.kr)

Preparation of YBa2 Cu3 Ox film deposited on various substrates by MOCVD Processing

Ключевые слова: HTS, YBCO, substrate single crystal, substrate CeO2/IBAD-YSZ/stainless steel, substrate Ni, MOCVD process, current-voltage characteristics, microstructure, texture, fabrication, critical caracteristics

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2767-2770

Полный текст на Sci-Hub

Дополнительная информация

Park C., Song K.J., Ryu K., Kim S.-W., Joo J.-H., Moon S.-H., Yoo S.-I., Ha H.-S., Ko R.-K., Kim H.-S.

Transport alternating current losses of BSCCO and YBCO tapes

Ключевые слова: HTS, Bi2223, tapes, YBCO, coated conductors, ac losses, ac losses, comparison

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2899-2902

Полный текст на Sci-Hub

Дополнительная информация

Lim S.-H., Kim H.-R., Hwang S.-D., Yim S.-W.(tyimsw@mail.ecc.u-tokyo.ac.jp), Kishio K.(tkishio@mail.ecc.u-tokyo.ac.jp)

Electrical behavior of Bi-2223/Ag tapes under applied alternating over-currents

Ключевые слова: HTS, Bi2223/Ag, PIT process, tapes, overcurrent, ac performance, quench properties, current distribution, cycling, quench protection, experimental results, fabrication

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2482-2487

Полный текст на Sci-Hub

Дополнительная информация

Sim J.(jungwook@kepri.re.kr), Choi Y.-S., Kim H.-R., Hyun O.-B.

Equal Current Distribution in Parallel Circuits of Resistive Superconducting Fault Current Limiters Using Multiple Superconducting Inter-Phase Transformers

Ключевые слова: FCL resistive, transformers, HTS, Bi2223, tapes, coils pancake, YBCO, films, current distribution, experimental results, power equipment

IEEE Transactions Applied Superconductivity, 2005, v.15, N 2, p.2122-2125

Полный текст на Sci-Hub

Дополнительная информация

Kim K., Lee H.(hlee@jokaku.mit.edu), Kim H.M., Iwasa Y., Arakawa P., Laughon G.

Development of vapor-cooled HTS-copper 6-kA current lead incorporating operation in the current-sharing mode

Ключевые слова: HTS, Bi2223, tapes, current leads, design, test results, magnetic properties

Cryogenics, 2004, v.44, N 1, p.7-14

Полный текст на Sci-Hub

Дополнительная информация

Chung K.C., Kim H.S., Lee B.S., Lim S.M., Youm D.

Direct current sputtering conditions for the growth of yttria-stabilized ZrO2 buffer layers of coated conductors

Ключевые слова: HTS, coated conductors, RABITS process, substrate Ni, buffer layers, microstructure, experimental results, fabrication, magnetic properties

Superconductor Science Technology, 2004, v.17, N 2, p.291-294

Полный текст на Sci-Hub

Дополнительная информация

Chung K.C., Lee B.S., Kim H.J., Lim S.M., Youm D., Park C.

Fabrication of Sm1Ba2Cu3O7 coated conductors using the co-evaporation method

Ключевые слова: HTS, REBCO, coated conductors, RABITS process, substrate Ni, co-evaporation process, current-voltage characteristics, critical current, fabrication, experimental results, critical caracteristics, magnetic properties

Superconductor Science Technology, 2004, v.17, N 4, p.580-584

Полный текст на Sci-Hub

Дополнительная информация

Chung K.C., Kim H.S., Lee B.S., Lim S.M., Youm D.

Comparative studies on the growth conditions of CeO2 and Y2O3 buffer layers on NiW tapes

Ключевые слова: HTS, YBCO, coated conductors, buffer layers, substrate Ni-W, co-evaporation process, microstructure, experimental results, fabrication, magnetic properties

Superconductor Science Technology, 2004, v.17, N 1, p.148-154

Полный текст на Sci-Hub

Дополнительная информация

Kim H.S., Lee S., Bae D.K., Joo M., Ko T.K., Ahn M.C., Kang H.

Design, fabrication, and test of high-Tc superconducting DC reactor for inductive superconducting fault current limiter

Ключевые слова: FCL inductive, HTS, Bi2223, tapes, FCL rectifier type, coils solenoidal, series connection, design, fabrication, test results, current-voltage characteristics, power equipment, critical caracteristics, dc reactor

IEEE Transactions Applied Superconductivity, 2004, v.14, N 2, p.827-830

Полный текст на Sci-Hub

Дополнительная информация

Ko T.K., Ahn M.C., Kim H.J., Kang H., Chang H.

Design and cooling characteristic results of cryogenic system for 6.6 kV/200 A inductive fault current limiter

Ключевые слова: FCL inductive, cooling technology, nitrogen liquid , cryogenic systems, FCL rectifier type, HTS, tapes, tapes reinforced, Bi2223, test results, power equipment

IEEE Transactions Applied Superconductivity, 2004, v.14, N 2, p.883-886

Полный текст на Sci-Hub

Дополнительная информация

Joo J., Kim H.J., Kim S., Song K.J., Ryu K.W., Huh D.H.

Effect of AC magnetic field on transport current loss of HTS tapes

Ключевые слова: HTS, Bi2223/Ag, tapes multifilamentary, ac losses, numerical analysis, experimental results

IEEE Transactions Applied Superconductivity, 2004, v.14, N 2, p.646-649

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Kim H.

Application of IPTs to HTS Cable Conductor for Uniform Current Distribution Between Their Layers

Insulation test of reciprocal and concentric winding arrangement for a HTS transformer

Comparative study of YBCO film growth in the cold wall type and hot wall type MOCVD processes

Effect of the Cu/Ba ratio for the YBCO deposition onto IBAD template by the MOCVD method

High rate DC-reactive sputter deposition of Y2O3 film on the textured metal substrate for the superconducting coated conductor

YBCO coated conductor using biaxially textured clad composite Ni–Mn/Ni–Cr substrate

Investigation of On-Board Hybrid Pulse Tube Cryocooler for High Temperature Superconducting Rotor

Use of SrTiO_3 as a Single Buffer Layer for RABiTS YBCO Coated Conductor

Fabrication of YBCO superconducting tape by metal organic chemical vapor deposition method

Preparation of YBa2 Cu3 Ox film deposited on various substrates by MOCVD Processing

Transport alternating current losses of BSCCO and YBCO tapes

Electrical behavior of Bi-2223/Ag tapes under applied alternating over-currents

Equal Current Distribution in Parallel Circuits of Resistive Superconducting Fault Current Limiters Using Multiple Superconducting Inter-Phase Transformers

Development of vapor-cooled HTS-copper 6-kA current lead incorporating operation in the current-sharing mode

Direct current sputtering conditions for the growth of yttria-stabilized ZrO2 buffer layers of coated conductors

Fabrication of Sm1Ba2Cu3O7 coated conductors using the co-evaporation method

Comparative studies on the growth conditions of CeO2 and Y2O3 buffer layers on NiW tapes

Design, fabrication, and test of high-Tc superconducting DC reactor for inductive superconducting fault current limiter

Design and cooling characteristic results of cryogenic system for 6.6 kV/200 A inductive fault current limiter

Effect of AC magnetic field on transport current loss of HTS tapes